4 Small Garage Door Repairs You Can Do it Yourself

Glendale

Garage door require continuous maintenance, but you don’t need to spend a fortune on repair services. Just be careful, and do some small fixtures every now and then. Following, we are suggesting a few tips to help maintain your door.

  • Install a Weather Seal

Weather seals save energy, it helps to prevent moisture from entering inside your garage door. These seals should be applied to the bottom end of garage door between the door panels, and on the frame.

Glendale

  • Clean the Garage Door Track

Don’t spray any lubricant on door track whenever it becomes noisy or sticky. It doesn’t contribute to functioning door. Lubricates initiate collecting particles that harden or ruins how it should work. Garage door repair services recommend checking the track every week.

Therefore, instead of lubricating the track, they need to be cleaned properly. Just wipe the inside portion of track with damp cloth. Once cleaned, wipe the whole thing with dry cloth. Just remove the sticky residue on track.

  • Realign Garage Door Sensors

When the garage door sensors don’t work properly, they may be knocked out of place. Align the sensors as realigning the sensors will need you to gently push sensors in the right place. The right position would be where both sensors face each other.

You can do it without calling an garage door opener installation service. When sensors are not aligned properly, their lights blink as indicators. Once the sensors are re-positioned and aligned properly, a solid light replaces blinking light.

  • Reset the Opener

If your garage door closes and opens itself, no need to call professional Garage Door opener installation Glendale. Every garage door has its own instructions for reset, just shut off the power, and unplug opener. Wait for a few seconds and turn back the power and everything will be set.

3 Reasons to Insulate Your Garage Door

Panorama City

Is your garage door noisy? Don’t worry, you don’t need to replace it now, not unless you solve the noise issue with proper insulation. Yes, you can get rid of a noisy garage door with proper insulation. If you think insulating a garage door is a waste of your money, then you are in for a surprise.

Following, we are giving you a few legit reasons why you should consider insulating your garage door.

Panorama City

  • Saves Energy

Insulating your garage door makes your garage more energy efficient. People have different construction standards for garages and they deal it as one of least energy efficient areas thanks to air leaks and gaps. Garage often lets more cold air into your home, and therefore heating system comes under immense load.

However, hiring Garage Door Repair Panorama City Company to install insulation on garage door can help make keep your home warm, and save energy.

  • Takes Care of Noise

Insulated garage doors make less noise. This comes in handy if you work early or late as you don’t want to disturb everyone around you. Insulation dampens vibration along the door with noise outside when it is used. If your door makes a lot of noise, you better check and lubricate hinges, springs, tracks, etc.

  • Warms Up Your Home

Let’s be honest, we use our garages to store a lot more than just our car. You can work out here, or use the space for creative purposes. If not, you can use the area to move in pets, groceries, etc.  Whatever you do, make sure this buffer zone between the outdoors and rest of your home stays warm.

Yes, you need to assure it doesn’t loss too much heat instantly. You can easily do this  by contacting Garage Door Repair Services and asking them to install insulation on your garage door.

3 Easy Tips to Program Your Garage Door Remote

Malibu

You should learn how to program your door yourself. This way, you don’t have to call in a professional service every time you need to assure your garage door is secure. Whatever the reason is, you lost the remote, or there is a new driver, following we are giving you easy tips to program the door yourself.

  • Get the Right Frequency

Garage doors work on different frequencies. Older models needed 390 MHz while modern ones respond to 315 MHz. Garage Door Opener Installation Malibu suggests there are two different ways to find out the frequency that works for you.

Malibu

First, refer to owner manual. If you don’t have one, look on back of the opener and find part numbers. Once you get the part numbers, use them to search online and find out what frequency is used for them. Now use this information to buy the right remote, or keypad for door opener.

  • Find the Learn Button

Every garage door opener features a learn button on back of device. So climb up to garage door motor with latter, remove light cover, and go to the back of device where wires connect to find Learn button. It is a red square button.

If you can’t do it yourself, call a Garage Door Repair service, and ask them to help you with this.

  • Program the Door

Once you find the button, press it (don’t hold, just press it once). Now you have 30 seconds to program your garage door remote. When you program the remote, hold down the button on your remote you want to program.

The motor makes a clicking noise, and light will flash. Now the next time you press this button, your garage door will open/close. When it comes to program the keypad, you need to go to the keypad after pressing learn button and type in desired 4 digit code, and enter.

The keypad will flash letting you know everything is taken care of. Contact your local Garage Door Repair Services for more information.